.
Find a Distributor | Catalogue contents page

Glass Shading Paints

Unless otherwise indicated these products are for professional use only; operators must have had training and be suitably qualified to use them.

Supplied by Fargro and its national distributors

Coolglass

Coolglass is a white shading material for glasshouses and many other situations such as hospitals, factories, offices and schools where reduction in sunlight is required.

Mixes readily with cold water and can be applied by sprayer or by painting with a brush.

Once applied it remains effective throughout the summer months.



More information:

•  Product Manual for Coolglass
•  Safety data sheet for Coolglass
Coolglass pack
Fargro CodePack Size
CO55 lt


Coolglass is a registered trade mark of Bayer AG | 31/07/12
Supplied by Fargro and its national distributors

GS-4 horticultural Glass Cleaner

GS-4 is a glass cleaner suitable for glass greenhouses. GS-4 contains no hydrogen fluoride gas and has virtually no vapour effect. This is why GS-4 is safer for humans and the environment.

Contains ammonium hydrogen difluoride. Subject to the poisons rules.

Application Method:Spray evenly on the glass. Rinse off after 10 minutes. Do not allow to dry on the glass.
Application Rate:Dilute 1 lt in between 5 and 20 lt of water depending on the dirtiness of the glass.
Comment:Subject to the Poisons Act 1972 and Poisons Rules 1982.

More information:

•  Product Manual for GS-4
•  Leaflet for GS-4
•  Safety data sheet for GS-4
GS-4 pack
Fargro CodePack Size
GS425 lt


GS-4 is a registered trade mark of Mardenkro BV. | 23/07/13
Supplied by Fargro and its national distributors

ReduFuse

For the first time, it is possible to create diffused light in greenhouses while retaining high light transmission, without huge investments. Moreover, ReduFuse can be easily removed, which means that no valuable light will be lost in months with little sunlight!

EXPERIENCES WITH REDUFUSE

  • More photosynthesis, even at the bottom of the plant.
  • Higher yield and better quality.
  • Uniform climate, creating less stress in the plant.
  • Diffused light for a fraction of the investment of other alternatives.
  • ReduFuse has a very high transmission and haze factor.
  • Easy to apply with a spray machine.
  • Highly wear resistant.
  • Completely transparent when wet.
  • The coating can be removed with ReduClean, resulting in no loss of light in darker periods.

More information:

•  Product Manual for ReduFuse
•  Leaflet for ReduFuse
•  ReduFuse Growing Tips
•  Safety data sheet for ReduFuse
•  Manufacturers Website
Redufuse pack
Fargro CodePack Size
REDUF15 kg


ReduFuse is a registered trade mark of Mardenkro BV. | 31/07/12
Supplied by Fargro and its national distributors

ReduSol

ReduSol is a liquid shading agent for use in greenhouse horticulture that can be easily removed with ReduClean after the season. The shading effect can be adjusted by selecting the dilution factor that fits the respective crop. ReduSol is highly resistant to wear. This is reduced when higher dilution ratios are used.

Advantages:
  • White even coating.
  • Adjustable shading levels.
  • Easy to apply.
  • Highly resistant to wear.
  • Diffuse light.
  • Higher light transmission when wet.
  • Easy to remove with ReduClean.
  • Safe for humans and for the environment.

More information:

•  Product Manual for ReduSol
•  Leaflet for ReduSol
•  Redusol Extra with ReduClean Leaflet
•  Safety data sheet for ReduSol
•  Manufacturers Website

Video:

This animated video produced by Mardenkro, focuses on the application methods of ReduSol & ReduClean.
Watch this Video
Redusol pack
Fargro CodePack Size
REDUS20 kg


ReduSol is a registered trade mark of Mardenkro BV. | 31/07/12
Supplied by Fargro and its national distributors

ReduHeat

ReduHeat is a liquid shading agent that transmits a significant amount of growth light (PAR) and reflects radiation (NIR) to a large extent. This makes ReduHeat especially suitable for those crops that require moderate to light shading against heat radiation as well as a maximum amount of growth light. By changing the concentration of ReduHeat in the solution being applied, the shading effect can be adjusted to the needs of the crop. When using a very low concentration the wear resistance of ReduHeat can diminished.

ReduHeat can be easily removed with ReduClean after the season.

Advantages:
  • Improved light/heat ratio.
  • Diffuse light.
  • Adjustable shading levels.
  • Highly wear resistant.
  • Easy to remove with ReduClean.
  • Safe for humans ad from the environment.
ReduHeat differs from ReduSol and other traditional shading agents in that it provides a more favourable balance between light and heat.

More information:

•  Product Manual for ReduHeat
•  Leaflet for ReduHeat
•  ReduHeat with ReduClean Leaflet
•  ReduHeat Technical Bulletin
•  Safety data sheet for ReduHeat
•  Manufacturers Website

Video:

This animated video produced by Mardenkro, focuses on the application methods of ReduHeat & ReduClean.
Watch this Video
reduheat pack
Fargro CodePack Size
REDUH15 kg


ReduHeat is a registered trade mark of Mardenkro BV. | 31/07/12
Supplied by Fargro and its national distributors

ReduClean

ReduClean is developed for removing ReduSol, ReduFuse and ReduHeat from glass, plastic film, polycarbonate or acrylate. After a period of shading you wish to gain optimal light in your greenhouse. By removing ReduSol or ReduHeat from your greenhouse you will regain a clear roof. ReduClean is easy in use and not harmful for humans and the environment. Together with ReduSol and ReduHeat forms ReduClean the ‘perfect shading system’.

Advantages:
  • High cleaning effect.
  • Easy and economical in use.
  • Safe for humans and the environment.

More information:

•  Product Manual for ReduClean
•  Leaflet for ReduClean
•  Safety data sheet for ReduClean
•  Manufacturers Website
Reduclean pack
Fargro CodePack Size
REDUC2525 lt


ReduClean is a registered trade mark of Mardenkro BV. | 31/07/12